Email Print

Work continues at Clemson’s wind turbine test facility


Staff Report
Published Jan. 14, 2013

Construction continued on Clemson University’s Wind Turbine Drivetrain Testing Facility in North Charleston Friday when the foundation for the larger test rig was poured.

Choate Construction engineers poured 1,900 cubic yards of concrete into a pit 50 feet wide, 100 feet long and 15 feet deep, all resting on 115, 70-foot-deep piles, to form the 15-megawatt test rig foundation.

Choate Construction engineers managed a second massive concrete pour last week as construction continues on Clemson University’s Wind Turbine Drivetrain Testing Facility. (Photo/Peter Hull of Clemson)
Choate Construction engineers managed a second massive concrete pour last week as construction continues on
Clemson University’s Wind Turbine Drivetrain Testing Facility. (Photo/Peter Hull of Clemson)
The building’s foundation is almost seven stories deep. The pit already has approximately 450 tons of reinforcing steel, weighing roughly as much as 250 mid-size cars.

When complete later this year, the facility will have the capability for full-scale highly accelerated testing of advanced drivetrain systems for wind turbines in the five- to 15-megawatt range.

The project has taken months of planning and thousands of hours of preparation and field work. Engineers must consider environmental conditions, influence from local traffic and other factors that could cause an inconsistent flow of concrete.

The project broke ground in October 2010 and construction began in 2011. Last May, the engineering team poured the foundation for the smaller, 7.5-megawatt test rig, requiring 750 cubic yards of concrete.

The project involves completely redeveloping an 82,000-square-foot warehouse on the former Navy base. Engineering design was performed by AEC Engineering of Minneapolis.

In November 2009, Clemson and its partners were awarded a $45 million grant from the U.S. Department of Energy, which was combined with $53 million of matching funds, to build and operate the large-scale testing facility for next-generation wind turbine drivetrains.

Previous coverage
Clemson study measures impact, potential of wind energy in S.C.
Wind turbine test facility most advanced globally, says project manager
Foundation to be poured for Clemson’s wind turbine testing facility
Clemson University inks wind facility contracts
Clemson University breaks ground for wind facility
Clemson wind turbine facility attracts first manufacturer
Board OKs $7 million for wind turbine research


Comments: